• Diskpart Clean Sd Card Download
• Diskpart Clean Sd Card Reader

Type: exit and hit Enter Here, one thing to be noticed is that DiskPart CMD command indeed will help you clean the whole SD card, but you do need to recreate a new partition to make the SD card available for saving files again. When Should We Use Diskpart Clean? If an USB flash drive, SD card, or another drive isn’t working quite right, cleaning the drive and removing its partitions is one possible solution. This can fix problems like Windows cannot complete the format or a hard drive is showing the wrong capacity. The clean command zeroes out the sectors of the disk that contain the partition data. If you wished to zero out all data on the SD card you could use “clean all” instead, but unless you have a pressing privacy/security reason for overwriting the the entire SD card with zeros, it’s unwise to waste the read/write cycles of the flash media.

Read this article to find out what to do if a USB drive, a memory card or another storage device works incorrectly. Cleaning the disk and its partitions with the command Clean and Diskpart tool can become one of the ways to solve the problem. This way, you can fix problems with a drive which can’t be formatted or displays the wrong capacity.

Contents

The trick will also remove partitions which cannot be deleted with other Windows integrated tools such as Disk Management. This process will completely remove the disk partition table so that you can create it from the scratch.

Attention! It will erase your disk completely so take care to back up your files. Also, it is very important to make sure that you have chosen the right device, otherwise you risk to delete data from the wrong disk.

Launch the Command prompt as Administrator

First of all, start the Command prompt as Administrator. In Windows 10 or 8.1, just right-click on the Start menu and select Command Prompt (Admin).

In Windows 7, find Command Prompt in the Start menu. Right-click and select Run as Administrator.

Diskpart

To clean the disk, use the command Diskpart. Before doing it, make sure that the USB drive, memory card or another device you want to clean is connected to the computer.

To run the Diskpart utility, type the corresponding command in the Command Prompt and press Enter:

Diskpart

Use this command to see the list of all disks installed in this computer:

list disk

View the result and decide on the digit of the disk you want to clean.

Be careful! If you choose a wrong disk digit, the disk will be erased and important data may be lost.

In the screenshot below, you can see that Disk 0 has the capacity of 111 GB, Disk 1 – 931 GB, and Disk 2 – 14 GB. We know that we need to work with the disk having 14 GB of space. Then Disk 2 is the USB drive, and Disk 0 is the computer’s system disk, while Disk 1 is its main internal hard disk.

After you’ve decided on the disk digit, type the following command, replacing the symbol # with the disk digit.

Attention! Be very attentive. If you give the wrong disk digit, you may erase all data from the wrong disk.

select disk #

Diskpart Clean Sd Card Download

Diskpart has selected the disk you specified. Now all actions you take will affect this disk. To clean the partition table, type the following command and press Enter:

Attention! This command will remove all data from this disk! Make sure you have backed up all important information before you proceed.

Clean

If everything was correct, you will see a message saying the disk was cleaned successfully. Close the Command Prompt.

Creating partitions and disk formatting

Now use a Windows-integrated tool, Disk Management, to create partitions on this disk and format it. This can be done with the diskpart command, too, but it’s much easier with Disk Management.

In Windows 10 or 8.1, you can start Disk Management by right-clicking on the Start menu and selecting Disk Management.

Now you can see that the disk you were dealing with has no partitions at all. Right-click on this unallocated space and select New Simple Volume to create a partition and then format it into the file system you prefer. By default, Windows will create one partition covering the entire disk.

If this method doesn’t work - for example, the disk was cleaned but it can’t be partitioned or formatted, or the diskpart command can’t detect it - it means the disk is damaged physically and is unable to work properly. However, cleaning with the diskpart command is a simple solution capable of reviving seemingly hopeless disks.

And even if you overlooked all the warnings and cleaned the wrong disk (in fact, it does happen TOO often), don’t get upset. That data can still be recovered. For this purpose, your perfect choice would be a data recovery tool by Hetman Software – Hetman Partition Recovery.

Diskpart is a Windows built-in tool for users to clean up disk, format drive, or convert disk for free. However, sometimes Diskpart may not work due to some errors. If the Diskpart command fails to execute your command, don't worry.

You can either follow fixes on this page to make Diskpart work normally again or choose a Diskpart alternative tool to resolve this issue on your own:

Among these fixes, EaseUS Partition Master can assist you in formatting, erasing your USB, SD Card, or drive with ease.

Case - DiskPart Clean Not Working Error

'Hi there, do you know how to clean up a whole disk or USB drive when the diskpart clean command is not working in Windows 10? I was planning to use the Diskpart to erase my external hard drive so to wipe out all data. But it won't work.

Instead, it prompts an error message, warning that 'DiskPart has encountered an error: Access is denied...'. How can I fix this error, any DiskPart alternative method that can help me fix this issue? '

Are you having the same error on your computer? You want to use Diskpart to format or clean a hard drive, USB, or SD card, but the command window warns that Diskpart has encountered an error.

So why is Diskpart not working? Mostly, the Diskpart not working error is caused by the following reasons:

1. 1. Drive is occupied or being used by other programs.
2. 2. USB or SD card is locked or write-protected.
3. 3. Hard disk is encrypted by a third-party encryption tool.

With one of the listed problems on your device, Diskpart won't be able to execute any formatting or disk erasing command. As for the specific fixes, follow the next part, you can find all the detailed steps shown below.

How to Fix Diskpart Clean Not Working Error

Applies to: Fix Diskpart clean not working, cannot clean disk in Diskpart error in Windows 10/8.1/8/7, etc.

When Diskpart stops working or won't work for formatting or cleaning disk, follow the 5 fixes that you can apply to fix not working Diskpart on your computer immediately. Then, you can complete cleaning up disk or formatting drive, USB or SD card, etc. on your own.

Fix 1. Reconnect the Target Device to PC

Sometimes, when your hard drive or external USB, SD card is not correctly connected to the computer, Diskpart won't be able to execute any formatting or cleaning command lines. So your best choice is to reconnect the device:

Step 1. Unplug your USB, SD card from PC.

If it's a hard drive, reinstall it to your computer via a SATA cable and a power cable.

Step 2. Reconnect the target device to your PC again.

Step 3. Log in your computer as an Administrator.

Now, you can move to Fix 2 to check if the drive is currently locked or encrypted.

Fix 2. Check if Drive Is Being Occupied or Locked

Step 1. Keep the target device connect to your PC and open File Explorer.

Step 2.Try to open the device to see if you can access all data.

Step 3.Once the target device is accessible, follow Fix 4 or Fix 5 to clean the drive.

If the system warns that your device is being occupied by a running program or file, close the running program or opening file. Then move to Fix 4 or Fix 5 to execute the disk cleaning operation.

If you receive a notification, telling that your disk is write-protected, unlock or remove write protection from the device first with tutorials in Fix 3.

Fix 3. Unlock Drive, Remove Write Protection

Note that when a storage device is locked, encrypted, or write-protected, you won't be able to access nor make any changes to the drive. So the first thing to fix Diskpart not working error is to unlock, decrypt, and remove write-protection from your target disks.

You have four options:

#1. Unlock External USB/SD Card

Step 1. Connect the external USB or SD card to PC correctly.

Step 2. Change the Switch on USB or SD card to the Off-side.

Unlock SD card:

Unlock USB:

After this, you can run Diskpart clean command to clear the USB or SD card now. For an easier way, turn to EaseUS Partition Master as shown in Fix 4 for help.

#2. Remove Read-only State from Device

Device display as Read-only is a common issue that stops Diskpart from cleaning or formatting a storage device. If your disk shows as Read-only in Disk Management or says it's read-only, take the steps below to clear this state, making your drive accessible again:

Step 1. Keep the device connected to your PC correctly.

Step 2. Press Windows + R, type cmd and hit Enter to open Command Prompt.

Step 3. Type the command lines here and hit Enter each time to clear read-only state from your device:

• diskpart
• list disk
• select disk #
• attributes disk clear readonly

​Replace # with the disk number of your target device.

Step 4. Type exit to close the program once the process completes.

#3. Remove Write Protection by Editing Registry Key

When a storage device is write-protected, you can follow the steps here to remove write protection by editing the registry key:

Step 1. Connect the write-protected device to PC.

Step 2. Type regedit in the Run dialog and click 'OK' to open Registry.

Step 3. Navigate to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlStorageDevicePolicies.

Step 4. Double click 'WriteProtect' key and change the value to '0', click 'OK' to confirm.

After this, exit Registry and restart your PC. There, you should be able to access the drive and clean it via Diskpart clean command now.

Remove Writ Protection Tool

If you are not professional in computing management and not familiar with command lines, don't worry. EaseUS R&D team has promoted a fresh kit for helping you resolve the write-protection issue on your hard drive, external hard drive, USB or SD card, etc., devices.

EaseUS Tools M is a practical computer fixing tool that is safe and light-weighted. It's a perfect alternative to the command line.

Use this one-click tool to solve the write-protection issues on your own:

Step 1: DOWNLOAD and install EaseUS Tools M for free.

Diskpart Clean Sd Card Reader

Step 2: Run EaseUS Tools M on your PC, choose the 'Write Protection' mode.

Step 3: Select the device which is now 'Write-Protected' and click 'Disable' to remove the protection.

#4. Decrypt Device using Third-party Tool

Note that if your hard drive, USB, or SD card is encrypted by a third-party software or encryption program, you will need to use the encryption tool to decrypt the drive.

Fix 4. Clean Disk/USB/SD Card Using Free Diskpart Alternative Tool

Best for: Windows beginners, all levels of Windows users;

Note that if you prefer an all-in-one disk cleaning tool, Diskpart is not the best shot. It's even too complicated for Windows beginners.

Here, we'd like to recommend you to try Diskpart alternative freeware - EaseUS Partition Master Free. It works as equivalently as diskpart in formatting devices, cleaning up and erasing data or changing file systems on your USB, SD card, or hard drive.

Follow to clean up your disk, USB, or SD card now:

Step 1. Launch EaseUS Partition Master, right-click the partition you want to erase data from, and choose 'Wipe Data'.

Step 2. In the new window, set the time for which you want to wipe your partition, then click 'OK'.

Step 3. Click the 'Execute Operation' button in the top-right corner, check the changes, then click 'Apply' to wipe the data on your partition.

After this, your disk is blank and you can apply the Create partition feature in this tool to create new partitions to save your data.

Besides, it even supports you to resize partition, create a new partition, delete or even command partitions for free on Windows 10/8/7/Vista/XP.

Fix 5. Run Diskpart Clean Command to Clean Drive/USB/SD Card

Finally, you should have fixed all the errors which stop diskpart from working in the system disk, external storage devices. And then, you can run a disk clean command in Diskpart to make it 100% working again:

Clean Disk via Diskpart Clean Command:

Step 1. Connect your device to PC.

Step 2. Press Windows + R keys, type cmd and hit Enter to open Command Prompt.

Step 3. Type the clean command lines here to wipe your disk and hit Enter each time:

• diskpart
• list disk
• select disk #
• clean or clean all

Replace # with your drive number.

'Clean' means to delete everything on your drive but files are recoverable.

'Clean all' means to erase your drive, data, both partitions and data will be unrecoverable.

Step4. Type exit to close the Window.

Conclusion

On this page, we explained the causes of Diskpart clean not working error, and provide the complete resolution to help you fix this issue. If you are with this error, reconnect your drive, and remove the write protection first.

Then, apply the easiest Diskpart clean alternative tool - EaseUS Partition Master Free to easily wipe the hard drive, clean everything on your drive in only a few simple clicks.

If you have more questions related to Diskpart clean, check the questions and answers listed here. Hope we can solve your doubts.

People Also Ask About Diskpart Clean

1. Does Diskpart clean erase data?

Note that Diskpart clean command is set to delete all partitions and data on the target device. Accordingly, the data that gets cleaned is recoverable. So the answer is no.

Diskpart clean command will not erase data. But the Diskpart clean all command will do.

2. How long does Diskpart clean take?

According to most users and EaseUS partition master expert, Diskpart clean is a very shot process. It only takes 1-2 minutes to delete everything from the drive.

But the clean all command in Diskpart will last longer, about 4-5 minutes or so. Because it will delete all the partitions on your target device and erase all saved files.

3. How do I format disk via Diskpart command?

If you want to format a hard drive, USB, or SD card using Diskpart, here is a simple guide that you can follow:

1. 1. Connect target disk to PC.
2. 2. Press Windows + R, type diskpart, and hit Enter.
3. 3. Type list disk and hit Enter.
4. 4. Type select disk # and hit Enter.
5. 5. Type format fs=ntfs quick or format fs=fat32 quick and hit Enter.
6. 6. Type exit and hit Enter.

Read More: Format USB Flash Drive using CMD.

Now that you can apply diskpart to format a disk, clean up data in hard drive partition or change the file system of USB/SD card, etc. storage devices in your PC again.